Precision ag for every tractor in your shed, installed and supported from Francesville.
Schlatter’s has over 25 years of experience selling, installing and calibrating precision agriculture systems: autosteer, rate and section control, yield monitoring and ag software. PTx Trimble, the precision ag company formed by AGCO and Trimble in 2024, builds equipment that works across mixed fleets, regardless of brand.
How a PTx Trimble system fits together
GFX series displays
Android-based touchscreens running the Precision-IQ field application. GFX displays are ISOBUS-compatible, so one screen can run ISOBUS implements from any manufacturer, and they move easily between tractors, sprayers and combines as the season changes. Built-in Wi-Fi and Bluetooth connect to PTx FarmENGAGE for your field data.
The compact, entry-level display. Easy to learn, easy to move, and a good fit for guidance, assisted steering and basic application control.
The workhorse. More processing power, room for complex implements and up to 255 sections, with a second camera input for the planter or auger.
The largest GFX screen, with the same horsepower as the 1060. Ideal in the sprayer or planter cab where you want maps, run screens and cameras side by side.
Still running a TMX-2050, FmX or older CFX display? We continue to support them. See our TMX / FmX support and GFX display support pages, or ask us about upgrade paths.
NAV guidance controllers
The roof-mounted GNSS receiver determines how accurate your guidance and steering can be. Every NAV controller works with every GFX display.
Successor to the NAV-900 and PTx Trimble’s most advanced receiver.
- Up to 50% better positioning and line following than the NAV-900
- Enhanced GNSS engine tracks more satellites, upgraded inertial sensors
- Trimble ProPoint with IonoGuard to ride out solar activity
- Cast aluminum base built for heat, cold, rain and dust
- Onboard Wi-Fi and Bluetooth for easier service
- Uses the same cables as the NAV-900, so upgrades are simple
The proven high-precision receiver found on thousands of Midwest tractors.
- Wide range of accuracy levels, basic through high precision
- ProPoint engine for faster convergence and better performance near tree lines and buildings
- GPS, GLONASS, Galileo and BeiDou
- Ready for Autopilot and EZ-Pilot Pro steering
An affordable entry point for tillage, broadacre seeding, spraying and harvest.
- Sub-meter repeatable accuracy with ViewPoint RTX
- Five satellite constellations
- Roll-corrected manual guidance
- Works with EZ-Steer and EZ-Pilot Pro steering
- Bluetooth and two CAN ports in a low-profile housing
Correction services
Already running RTK for tiling? Your base station and radios can often serve your farm equipment too. Ask us, or visit our field support FAQ.
Assisted and automated steering
From a portable steering-column motor to fully integrated hydraulic autosteer, there is an option for every tractor, sprayer and combine, regardless of brand.
Autopilot
Hands-free automated steering with hydraulic, motor drive and CAN-based options. Paired with a NAV-960 it delivers sub-inch accuracy on rolling ground and slopes, and it operates at slow speeds and in reverse.
Autopilot Motor Drive
Autopilot-level RTK steering without hydraulic components. It mounts on the steering column with no AutoSense or angle sensor, so it moves quickly between machines.
EZ-Pilot Pro
High-accuracy assisted steering for MFWD and 4WD tractors and combines. Engage in reverse for up to 15 seconds to line up the next pass, and move it between vehicles with minimal hardware.
EZ-Pilot
Affordable, hands-free assisted steering with a compact electric motor on the steering column. Suited to both broadacre work and high-accuracy row crops.
TrueTracker
The next generation of active implement guidance. TrueTracker keeps mounted and trailed implements on the same repeatable track as the tractor, even on side hills and uneven ground. It is controlled through Precision-IQ on a GFX display with the NAV-960.
Put inputs only where they belong
Rate and section control cut overlap on point rows and headlands and let you run variable-rate prescriptions on seed, fertilizer, liquid and anhydrous.
Field-IQ crop input control
A modular system that grows with your implements.
- Planters, spreaders, sprayers, air seeders and liquid strip-till bars
- Variable rate control with Rawson drives
- Automatic section control with Tru Count clutches and LiquiBlock valves
- Seed monitoring for population, skips and multiples
- Automatic spinner speed control for spreaders
Field-IQ ISOBUS liquid control
Rate and section control for sprayers, anhydrous toolbars and liquid toolbars through true ISOBUS compatibility.
- Works on any implement applying liquid
- Connect any ISO terminal once the ECU is configured
- Uses existing Field-IQ install kits
- Standard setup and calibration screens
Trimble Universal Variable Rate (TUVR)
Already own a rate controller? TUVR is a serial protocol supported by many implement controllers, giving your GFX display automatic rate and section control with the hardware you have.
Field-IQ ISOBUS weather station & GreenSeeker
The weather station shows live wind and weather changes on the ISOBUS terminal while you spray. The GreenSeeker handheld sensor gives objective crop health readings for nitrogen decisions and better variable-rate maps.
We install it, calibrate it and stand behind it
Let’s build the right system for your farm.
Tell us what you run and what you want to accomplish. We’ll match the display, receiver, steering and application control to your equipment and budget.